Overview
Specification
LP125WH2-SPM1
LP125WH2-SPM1 Basic Information
| Panel Model | LP125WH2-SPM1 |
|---|---|
| Panel Brand | LG Display |
| Descrition | a-Si TFT-LCD ,12.5 inch, 1366×768 |
| Panel Type | a-Si TFT-LCD |
| LP125WH2-SPM1 Price | Request Price & Lead Time |
| Model Alias | LP125WH2 (SP)(M1) |
| Operating Temperature | 0 ~ 50 °C |
| Storage Temperature | -20 ~ 60 °C |
LP125WH2-SPM1 Mechanical Features
| Dot Resolution | 1366(RGB)×768 (WXGA) |
|---|---|
| Pixel Configuration | RGB Vertical Stripe |
| Pixel Density | 125 PPI |
| Aspect Ratio | 16:9 (H:V) |
| Form Factor | Flat Rectangle Display |
| Dot Pitch | 0.067×0.201 mm (H×V) |
| Pixel Pitch | 0.201×0.201 mm (H×V) |
| Weight | 210g (Max.) |
| Surface | Antiglare |
| Active Area | 275.59×154.94 mm (H×V) |
| Outline Dimension | 290.5×170.2 mm (H×V) |
| Outline Depth | 2.85 (Max.) mm |
| Landscape or Portrait | Landscape type |
LP125WH2-SPM1 Optical Features
| Display Mode | AH-IPS, Normally Black, Transmissive |
|---|---|
| Brightness | 300 cd/m² (Typ.) |
| Contrast Ratio | 500 : 1 (Typ.) (Transmissive) |
| Display Color | 262K (6-bit) |
| Color Gamut | 50% NTSC (CIE1931) |
| Response Time | 35 (Typ.)(Tr+Td) |
| Viewing Angle | 80/80/80/80 (Min.)(CR≥10) (L/R/U/D) |
| Viewing Direction | Symmetry |
| White color Chromaticity | Wx:0.313; Wy:0.329 |
| White Variation | 1.40/1.60 (Typ./Max.)(13 points) |
| Sunlight Readable | N |
LP125WH2-SPM1 Electronics Feature
| Vertical Frequency | 60Hz |
|---|---|
| Reverse Scan | No |
| Total Power Consumption | 3.21W (Typ.) |
LP125WH2-SPM1 Backlight System
| Lamp Position | Edge light type |
|---|---|
| Lamp Type | WLED |
| Lamp Life Time | 12K(Typ.) (Hours) |
| Interface Type | Included in panel signal interface |
| Lamp Driver Board | 2.66/2.77W (Typ./Max.) |
LP125WH2-SPM1 Signal Interface
| Signal Category | eDP |
|---|---|
| Signal Class | eDP (1 Lane) |
| Input Voltage for Panel | 3.3V (Typ.) |
| Input Current for Panel | 166/194mA (Typ./Max.) |
| Panel Power Consumption | 0.55/0.63W (Typ./Max.) |
| Interface Type | Connector |
| Signal Interface | HRS - KN38-30S-0.5H, Pitch:0.5 mm, Pin:30 pins |