Welcome to LCDs-Screen.com |
English

Select Language

EnglishDeutschItaliaFrançaisрусскийespañolPortuguês한국의Türk dilipolskiMagyarországČeština
Cancel
Overview Specification

LQ070Y3DG02

SHARP

LQ070Y3DG02 Basic Information

Panel Model LQ070Y3DG02
Panel Brand SHARP
Descrition a-Si TFT-LCD ,7.0 inch, 800×480
Panel Type a-Si TFT-LCD
LQ070Y3DG02 Price Request Price & Lead Time
Operating Temperature -20 ~ 60 °C
Storage Temperature -30 ~ 70 °C
Remarks 3 in 1 FPC

LQ070Y3DG02 Mechanical Features

Dot Resolution 800×480(RGB) (WVGA)
Pixel Configuration RGB Horizontal Stripe
Pixel Density 133 PPI
Aspect Ratio 15:9 (H:V)
Form Factor Flat Rectangle Display
Dot Pitch 0.1905×0.0635 mm (H×V)
Pixel Pitch 0.1905×0.1905 mm (H×V)
Weight 160/175g (Typ./Max.)
Surface Antiglare, Hard coating (3H)
Active Area 152.4×91.44 mm (H×V)
Outline Dimension 164.9×104 mm (H×V)
Outline Depth 5.0/5.3 (Typ./Max.) mm
Holes & Brackets Without
Landscape or Portrait Landscape type
Touch Panel Embeded (4-wire Resistive)

LQ070Y3DG02 Optical Features

Display Mode TN, Normally White, Transmissive
Brightness 280 cd/m² (Typ.)
Contrast Ratio 450 : 1 (Typ.) (Transmissive)
Display Color 16.7M (8-bit)
Color Gamut 48% NTSC (CIE1931)
Response Time 35 (Typ.)(Tr+Td)
Viewing Angle 65/65/50/60 (Typ.)(CR≥10) (L/R/U/D)
Viewing Direction 6 o'clock
White color Chromaticity Wx:0.313; Wy:0.329
White Variation 1.10/1.30 (Typ./Max.)(5 points)
Sunlight Readable N

LQ070Y3DG02 Electronics Feature

Vertical Frequency 60Hz
Reverse Scan No
Time Controller (T-CON) Embedded T-CON

LQ070Y3DG02 Backlight System

Lamp Position Edge light type
Lamp Type WLED
Lamp Amount 8S3P
Lamp Shape 3 strings
Lamp Life Time 10K(Min.) (Hours)
Lamp Voltage 25.6/28.0V (Typ./Max.)
Lamp Current 20mA (Typ.)
Lamps Power Consumption 1.54W (Typ.)
Interface Type Included in panel signal interface
Lamp Driver Board No

LQ070Y3DG02 Signal Interface

Signal Category TTL
Signal Class Parallel RGB (1 ch, 8-bit)
Input Voltage for Panel 1.8/2.85V (Typ.)(VDDIO/VCI)
Input Current for Panel 10/45mA (Typ.)(IDDIO/IVCI)
Voltage for Display Signals 0≤VIL≤0.3VDDIO; 0.7VDDIO≤VIH≤VDDIO
Interface Type FPC